德国德玛吉机床润滑脂迪威诺Divinol-Lithogrease-000-GP000N-30

解决实际问题保证、原装进口并且长期稳定为客户储备库存，节约客户等货时间。涉及行业油：汽车行业、矿山行业、风电行业、纺织行业、石油开采、轨道交通、食品、电子行业、船舶制造与维护保养、航空航天、电机轴承、润滑系统、精密仪器行业。公司代理经销品牌有：瑞士摩托瑞斯MOTOREX、尼科NYCO、克鲁伯KLUBER、摩力克MOLYKOTE、魔力多MOLYDUVAL、科路德KLUTHE、福斯、潘东兴PENTOSIN、阿维亚AVIA、安润龙ANDEROL、亚拉ARAL、雪弗龙、赤士顿CHESTERTON、杰路比JET-LUBE、LE、劳勃抗LUBCON、好富顿HOUGHTON、Castrol、魔力大MOLYDAL、罗哥ROCOL、凯密特尔Chemetall、等品牌润滑油、润滑脂、防锈油、磨削液、切削液、锂基脂等。我们只销售新鲜产品，典型的保质期是两年。

>颜色/外观：德国德玛吉机床润滑脂迪威诺Divinol Lithogrease 000 GP000N-30

我司与国外70多家品牌生产商代理商建立长期的合作伙伴关系，能够快速帮助客户

>增稠剂：锂复合皂

>工作温度范围：-30°C  -  + 140°C

> NLGI级/ DIN 51 818：000

>基础油粘度/ 40°C / DIN 51 562：380mm²/ s

>含水量/ DIN 51 777 / T1：

>滴点/ DIN ISO 2176 gt; 160°C

>工作穿透/ 0.1mm，60双行程/ DIN ISO 2137：460

>工作穿透/ 0.1mm，5000双行程/ DIN ISO 2137：465

>流动压力在-20°C / DIN 51 805：300 hPa

>油分离18h / 40°C / DIN 51 817：5％

>对铜的腐蚀作用24h / 100°C / DIN 51 811：腐蚀程度1

>抗氧化性100°C / 100h / DIN 51 808：0.2 bar

> VKA焊接负载/ DIN 51 350 / T4：2800 N.

Divinol Lithogrease 000 is used for the lubrication of rollers in linear guide systems of machine tools. It can also be used for the lubrication of gears with a high mechanical load. The product is easily pumpable in central lubrication systems. The approval of the company Willy Vogel AG, Berlin is available. Due to its low consistence, Divinol Lithogrease 000 shows a clearly better flow behaviour as a comparable grease of NLGI-class 00.

Our customers use this product in central lubrication of DMG Deckel Maho Gildemeister (now a Mori Seiki company) milling machines and lathes.

One tube contains one liter.

We only sell fresh product and the typical shelf life is two years.

> Colour / Appearance: yellow

> Thickening agent: Lithium complex soap

> Operating temperature range: -30°C - +140°C

> NLGI-class / DIN 51 818: 000

> Base oil viscosity/40°C / DIN 51 562: 380 mm²/s

> Water content / DIN 51 777/T1:

> Drop point / DIN ISO 2176: > 160 °C

> Worked penetration/0.1mm, 60 double strokes / DIN ISO 2137: 460

> Worked penetration/0.1mm, 5000 double strokes / DIN ISO 2137: 465

> Flow pressure at -20°C / DIN 51 805: 300 hPa

> Oil separation 18h/40°C / DIN 51 817: 5 %

> Corrosion effect on copper 24h/100°C / DIN 51 811: Corrosion degree 1

> Oxidation resistance 100°C/100h / DIN 51 808: 0.2 bar

> VKA welding load / DIN 51 350/T4: 2800 N

Do you have any questions concerning this product?

 Further products by Zeller und Gmelin